Base
Application
Sandwich panels
Bi-metal A2 304
Steel 1,5 to 5 mm
Specifications
- Head style 5/16" (8 mm)
- Washer diameter standard 19 mm
- SS EPDM bond seal
- Support thread
- Thread for substructure steel 1,5 to 5 mm
- Drilling point 3
Options
- Powder coated in any desired RAL colour
- Washer diameter 16 or 22 mm
Certificates
Section
Applications
Using the table below, the correct length of the fastener can easily be determined.
Size | Minimal Insulation thickness | Article code | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.0 | 20.0 | 40.0 | 60.0 | 80.0 | 100.0 | 120.0 | 140.0 | 160.0 | 180.0 | 200.0 | 220.0 | 240.0 | 260.0 | ||
5,5/6,3 x 55 mm | 0 - 22 mm
|
1001035505519 | |||||||||||||
5,5/6,3 x 72 mm | 22 - 39 mm
|
1001035507219 | |||||||||||||
5,5/6,3 x 89 mm | 39 - 56 mm
|
1001035508919 | |||||||||||||
5,5/6,3 x 105 mm | 56 - 72 mm
|
1001035510519 | |||||||||||||
5,5/6,3 x 122 mm | 72 - 89 mm
|
1001035512219 | |||||||||||||
5,5/6,3 x 142 mm | 89 - 109 mm
|
1001035514219 | |||||||||||||
5,5/6,3 x 157 mm | 109 - 124 mm
|
1001035515719 | |||||||||||||
5,5/6,3 x 175 mm | 124 - 142 mm
|
1001035517519 | |||||||||||||
5,5/6,3 x 190 mm | 142 - 157 mm
|
1001035519019 | |||||||||||||
5,5/6,3 x 210 mm | 157 - 177 mm
|
1001035521019 | |||||||||||||
5,5/6,3 x 230 mm | 177 - 197 mm
|
1001035523019 | |||||||||||||
5,5/6,3 x 250 mm | 197 - 217 mm
|
1001035525019 | |||||||||||||
5,5/6,3 x 275 mm | 217 - 242 mm
|
1001035527519 | |||||||||||||
5,5/6,3 x 300 mm | 242 - 267 mm
|
1001035530019 |
Order information
Product | Size | Packaging | Article code |
---|---|---|---|
Sandwich Panel Screw 5,5/6,3 x 55 – BP3 | 55 mm | 100 pcs/box | 1001035505519 |
Sandwich Panel Screw 5,5/6,3 x 72 – BP3 | 72 mm | 100 pcs/box | 1001035507219 |
Sandwich Panel Screw 5,5/6,3 x 89 – BP3 | 89 mm | 100 pcs/box | 1001035508919 |
Sandwich Panel Screw 5,5/6,3 x 105 – BP3 | 105 mm | 100 pcs/box | 1001035510519 |
Sandwich Panel Screw 5,5/6,3 x 122 – BP3 | 122 mm | 100 pcs/box | 1001035512219 |
Sandwich Panel Screw 5,5/6,3 x 142 – BP3 | 142 mm | 100 pcs/box | 1001035514219 |
Sandwich Panel Screw 5,5/6,3 x 157 – BP3 | 157 mm | 100 pcs/box | 1001035515719 |
Sandwich Panel Screw 5,5/6,3 x 175 – BP3 | 175 mm | 100 pcs/box | 1001035517519 |
Sandwich Panel Screw 5,5/6,3 x 190 – BP3 | 190 mm | 100 pcs/box | 1001035519019 |
Sandwich Panel Screw 5,5/6,3 x 210 – BP3 | 210 mm | 100 pcs/box | 1001035521019 |
Sandwich Panel Screw 5,5/6,3 x 230 – BP3 | 230 mm | 100 pcs/box | 1001035523019 |
Sandwich Panel Screw 5,5/6,3 x 250 – BP3 | 250 mm | 100 pcs/box | 1001035525019 |
Sandwich Panel Screw 5,5/6,3 x 275 – BP3 | 275 mm | 100 pcs/box | 1001035527519 |
Sandwich Panel Screw 5,5/6,3 x 300 – BP3 | 300 mm | 100 pcs/box | 1001035530019 |
Mechanical properties
16 mm
19 mm
22 mm
Materials | ||
---|---|---|
Screw | Stainless steel 1.4301 (A2) – conform EN ISO 3506 |
|
Bond washer | Stainless steel 1.4301 (A2) – conform EN ISO 3506 | |
Material A (tl) | SteelQuality S280GD, S320GD and S350GD - conform EN 10346 | |
Material B (tll) | SteelQuality S235 – conform 10025-2 and S280GD, S320GD and S350GD - conform EN 10346 | |
Drilling capacity | Steel ≤ 5 mm |
Washer diameter
16 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 1 | 1.5 | 2 | 3 | 4 | 6 | ||||||||
VR,k [kN] | 0.4 | 0.83 | 0.83 | 0.83 | 0.83 | 0.83 | 0.83 | 0.83 | ||||||
0.5 | 0.93 | 0.93 | 0.93 | 0.93 | 0.93 | 0.93 | 0.93 | |||||||
0.55 | 1.11 | 1.11 | 1.11 | 1.11 | 1.11 | 1.11 | 1.11 | |||||||
0.63 | 1.39 | 1.39 | 1.39 | 1.39 | 1.39 | 1.39 | 1.39 | |||||||
0.75 | 1.82 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | |||||||
0.88 | 1.82 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | |||||||
1 | 1.82 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | |||||||
NR,k [kN] | 0.4 | 0.6 | 0.66 | 1.58 | 1.58 | 1.58 | 1.58 | 1.58 | ||||||
0.5 | 0.6 | 0.66 | 1.77 | 1.8 | 1.8 | 1.8 | 1.8 | |||||||
0.55 | 0.6 | 0.66 | 1.77 | 2.11 | 2.11 | 2.11 | 2.11 | |||||||
0.63 | 0.6 | 0.66 | 1.77 | 2.61 | 2.61 | 2.61 | 2.61 | |||||||
0.75 | 0.6 | 0.66 | 1.77 | 2.87 | 3.36 | 3.36 | 3.36 | |||||||
0.88 | 0.6 | 0.66 | 1.77 | 2.87 | 3.36 | 3.36 | 3.36 | |||||||
1 | 0.6 | 0.66 | 1.77 | 2.87 | 3.36 | 3.36 | 3.36 | |||||||
u [mm] | 40 | 6 | 5.5 | 5 | 4 | 3 | 2.5 | 2 | ||||||
50 | 7.5 | 6.5 | 6 | 5 | 3.5 | 3 | 2.5 | |||||||
60 | 9 | 8 | 7.5 | 6 | 4.5 | 3.5 | 3 | |||||||
80 | 12 | 11 | 10 | 8 | 6 | 5 | 4 | |||||||
100 | 15 | 13.5 | 12.5 | 10 | 7.5 | 6 | 5 | |||||||
120 | 18 | 16.5 | 15 | 12 | 9 | 7.5 | 6 | |||||||
140 | 21 | 19 | 17.5 | 14 | 10.5 | 8.5 | 7 | |||||||
>160 | 24 | 22 | 20 | 16 | 12 | 10 | 8 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor of γm = 1,33.
Materials | ||
---|---|---|
Screw | Stainless steel 1.4301 (A2) – conform EN ISO 3506 |
|
Bond washer | Stainless steel 1.4301 (A2) – conform EN ISO 3506 | |
Material A (tl) | SteelQuality S280GD, S320GD and S350GD - conform EN 10346 | |
Material B (tll) | SteelQuality S235 – conform 10025-2 and S280GD, S320GD and S350GD - conform EN 10346 | |
Drilling capacity | Steel ≤ 5 mm |
Washer diameter
19 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 1 | 1.5 | 2 | 3 | 4 | 6 | ||||||||
VR,k [kN] | 0.4 | 0.83 | 0.83 | 0.83 | 0.83 | 0.83 | 0.83 | 0.83 | ||||||
0.5 | 0.93 | 0.93 | 0.93 | 0.93 | 0.93 | 0.93 | 0.93 | |||||||
0.55 | 1.11 | 1.11 | 1.11 | 1.11 | 1.11 | 1.11 | 1.11 | |||||||
0.63 | 1.39 | 1.39 | 1.39 | 1.39 | 1.39 | 1.39 | 1.39 | |||||||
0.75 | 1.82 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | |||||||
0.88 | 1.82 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | |||||||
1 | 1.82 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | |||||||
NR,k [kN] | 0.4 | 0.6 | 0.66 | 1.77 | 2.14 | 2.14 | 2.14 | 2.14 | ||||||
0.5 | 0.6 | 0.66 | 1.77 | 2.3 | 2.3 | 2.3 | 2.3 | |||||||
0.55 | 0.6 | 0.66 | 1.77 | 2.62 | 2.62 | 2.62 | 2.62 | |||||||
0.63 | 0.6 | 0.66 | 1.77 | 2.87 | 3.14 | 3.14 | 3.14 | |||||||
0.75 | 0.6 | 0.66 | 1.77 | 2.87 | 3.55 | 3.91 | 3.91 | |||||||
0.88 | 0.6 | 0.66 | 1.77 | 2.87 | 3.55 | 3.91 | 3.91 | |||||||
1 | 0.6 | 0.66 | 1.77 | 2.87 | 3.55 | 3.91 | 3.91 | |||||||
u [mm] | 40 | 6 | 5.5 | 5 | 4 | 3 | 2.5 | 2 | ||||||
50 | 7.5 | 6.5 | 6 | 5 | 3.5 | 3 | 2.5 | |||||||
60 | 9 | 8 | 7.5 | 6 | 4.5 | 3.5 | 3 | |||||||
80 | 12 | 11 | 10 | 8 | 6 | 5 | 4 | |||||||
100 | 15 | 13.5 | 12.5 | 10 | 7.5 | 6 | 5 | |||||||
120 | 18 | 16.5 | 15 | 12 | 9 | 7.5 | 6 | |||||||
140 | 21 | 19 | 17.5 | 14 | 10.5 | 8.5 | 7 | |||||||
>160 | 24 | 22 | 20 | 16 | 12 | 10 | 8 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor of γm = 1,33.
Materials | ||
---|---|---|
Screw | Stainless steel 1.4301 (A2) – conform EN ISO 3506 |
|
Bond washer | Stainless steel 1.4301 (A2) – conform EN ISO 3506 | |
Material A (tl) | SteelQuality S280GD, S320GD and S350GD - conform EN 10346 | |
Material B (tll) | SteelQuality S235 – conform 10025-2 and S280GD, S320GD and S350GD - conform EN 10346 | |
Drilling capacity | Steel ≤ 5 mm |
Washer diameter
22 mm
tN1 [mm] | tII [mm] | |||||||||||||
0.75 | 1 | 1.5 | 2 | 3 | 4 | 6 | ||||||||
VR,k [kN] | 0.4 | 0.83 | 0.83 | 0.83 | 0.83 | 0.83 | 0.83 | 0.83 | ||||||
0.5 | 0.93 | 0.93 | 0.93 | 0.93 | 0.93 | 0.93 | 0.93 | |||||||
0.55 | 1.11 | 1.11 | 1.11 | 1.11 | 1.11 | 1.11 | 1.11 | |||||||
0.63 | 1.39 | 1.39 | 1.39 | 1.39 | 1.39 | 1.39 | 1.39 | |||||||
0.75 | 1.82 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | |||||||
0.88 | 1.82 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | |||||||
1 | 1.82 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | 1.91 | |||||||
NR,k [kN] | 0.4 | 0.6 | 0.66 | 1.77 | 2.21 | 2.21 | 2.21 | 2.21 | ||||||
0.5 | 0.6 | 0.66 | 1.77 | 2.42 | 2.42 | 2.42 | 2.42 | |||||||
0.55 | 0.6 | 0.66 | 1.77 | 2.8 | 2.8 | 2.8 | 2.8 | |||||||
0.63 | 0.6 | 0.66 | 1.77 | 2.87 | 3.42 | 3.42 | 3.42 | |||||||
0.75 | 0.6 | 0.66 | 1.77 | 2.87 | 3.55 | 4.22 | 4.34 | |||||||
0.88 | 0.6 | 0.66 | 1.77 | 2.87 | 3.55 | 4.22 | 4.34 | |||||||
1 | 0.6 | 0.66 | 1.77 | 2.87 | 3.55 | 4.22 | 4.34 | |||||||
u [mm] | 40 | 6 | 5.5 | 5 | 4 | 3 | 2.5 | 2 | ||||||
50 | 7.5 | 6.5 | 6 | 5 | 3.5 | 3 | 2.5 | |||||||
60 | 9 | 8 | 7.5 | 6 | 4.5 | 3.5 | 3 | |||||||
80 | 12 | 11 | 10 | 8 | 6 | 5 | 4 | |||||||
100 | 15 | 13.5 | 12.5 | 10 | 7.5 | 6 | 5 | |||||||
120 | 18 | 16.5 | 15 | 12 | 9 | 7.5 | 6 | |||||||
140 | 21 | 19 | 17.5 | 14 | 10.5 | 8.5 | 7 | |||||||
>160 | 24 | 22 | 20 | 16 | 12 | 10 | 8 |
- Above mentioned values are characteristic values
- To determine the design value we advise to apply a material factor of γm = 1,33.
Materials | ||
---|---|---|
Screw | Stainless steel 1.4301 (A2) – conform EN ISO 3506 |
|
Bond washer | Stainless steel 1.4301 (A2) – conform EN ISO 3506 | |
Material A (tl) | SteelQuality S280GD, S320GD and S350GD - conform EN 10346 | |
Material B (tll) | SteelQuality S235 – conform 10025-2 and S280GD, S320GD and S350GD - conform EN 10346 | |
Drilling capacity | Steel ≤ 5 mm |
mm